Beginner Tutorial 1: The SceneNode, Entity, and SceneManager constructs

Original version by Clay Culver

Initial C# edits by DigitalCyborg & ElectricBliss

Copyed to OgreDotNet section by rastaman

Note: This was written for Ogre 1.2.0, and is known to compile against it. Any problems you encounter while working with this tutorial should be posted to the ODN Help Forum.

Prerequisites

This tutorial assumes you have knowledge of C# programming and are able to setup and compile an Ogre application (if you have trouble setting up your application, see this guide). NO knowledge of Ogre is assumed for this tutorial outside of what is contained in the setup guide.

Introduction

In this tutorial I will be introducing you to the most basic Ogre constructs: SceneManager, SceneNode, and Entity objects. We will not cover a large amount of code; instead I will be focusing on the general concepts for you to begin learning Ogre.

As you go through the tutorial you should be slowly adding code to your own project and watching the results as we build it. There is no substitute for actual programming to get familiar with these concepts! Resist the urge to simply read along.

Getting Started

We will be using a pre-constructed code base for this tutorial. You should ignore all of the code except for what we will be adding to the createScene method. In a later tutorial we will go in depth explaining how Ogre applications work, but for now we will be starting at the most basic level. Create a project in the compiler of your choice for this project, and add a source file which contains this code:

using System;
 using System.Drawing;
 using OgreDotNet;
 using Math3D;
 namespace TutorialApplication1
 {
    class TutorialApplication : ExampleApplication
    {
        protected override void CreateScene()
        {
        }
        //[STAThread]
        static void Main(string[] args)
        {
            using(TutorialApplication app = new TutorialApplication())
            {
                app.Start();
            }
        }
    }
 }

If you are using the OgreSDK under Windows, be sure to add the "OgreSDK_DIRECTORY\samples\include" directory to this project (the ExampleApplication.h file is located there) in addition to the standard include. If using the Ogre source distribution, this should be located in the "OgreSource_DIRECTORY\Samples\Common\include" directory. Be sure you can compile and run this code before continuing to the next section, though nothing other than a blank screen with a framerate box will show up until we add things later in the tutorial.

Make sure you have a plugins.cfg and a resources.cfg in the same directory as the executable. Plugins.cfg tells OGRE which rendering libraries are available (Direct3D9, OpenGL, etc). Resources.cfg is used by the ExampleApplication and specifies paths to textures, meshes and scripts. Both are text files, so edit them and make sure the paths are correct. Otherwise your OGRE setup dialog box may not have any rendering libraries in it, or you may recieve an error on your screen or in Ogre.log that looks something like this:

Description: ../../Media/packs/OgreCore.zip - error whilst opening archive: Unable to read zip file

If you have problems, check Setting Up OgreDotNet in your project to setup your compiler properly or look in the Ogre.log file. If you need further help, search the forums. It is likely your problem has happened to others many times. If this is a new issue, read the forum rules then ask away. Make sure to provide relevant details from your Ogre.log, exceptions, error messages, and/or debugger back traces.

NOTE: C# users, if you need help, the best place to go is the OgreDotNet Forum.

Once the program is working, use the WASD keys to move, and the mouse to look around. The Escape key exits the program.

How Ogre Works

A broad topic. We will start with SceneManagers and work our way to Entities and SceneNodes. These three classes are the fundamental building blocks of Ogre applications.

SceneManager Basics

Everything that appears on the screen is managed by the SceneManager (fancy that). When you place objects in the scene, the SceneManager is the class which keeps track of their locations. When you create Cameras to view the scene (which we will cover in a later tutorial) the SceneManager keeps track of them. When you create planes, billboards, lights...and so on, the SceneManager keeps track of them.

There are multiple types of SceneManagers. There are SceneManagers that render terrain, there is a SceneManager for rendering BSP maps, and so on. You can see the various types of SceneManagers listed here. We will cover more about other SceneManagers as we progress through the tutorials.

Entity Basics

An Entity is one of the types of object that you can render on a scene. You can think of an Entity as being anything that's represented by a 3D mesh. A robot would be an entity, a fish would be an entity, the terrain your characters walk on would be a very large entity. Things such as Lights, Billboards, Particles, Cameras, etc would not be an Entity.

One thing to note about Ogre is that it separates renderable objects from their location and orientation. This means that you cannot directly place an Entity in a scene. Instead you must attach the Entity to a SceneNode object, and this SceneNode contains the information about location and orientation.

SceneNode Basics

As already mentioned, SceneNodes keep track of location and orientation for all of the objects attached to it. When you create an Entity, it is not ever rendered on the scene until you attach it to a SceneNode. Similarly, a SceneNode is not an object that is displayed on the screen. Only when you create a SceneNode and attach an Entity (or other object) to it is something actually displayed on the screen.

SceneNodes can have any number of objects attached to them. Let's say you have a character walking around on the screen and you want to have him generate a light around him. The way you do this would be to first create a SceneNode, then create an Entity for the character and attach it to the SceneNode. Then you would create a Light object and attach it to the SceneNode. SceneNodes may also be attached to other SceneNodes which allows you to create entire hierarchies of nodes. We will cover more advanced uses of SceneNode attachment in a later tutorial.

One major concept to note about SceneNodes is that a SceneNode's position is always relative to its parent SceneNode, and each SceneManager contains a root node which all other SceneNodes are attached.

Your first Ogre application

Now go back to the code we created earlier. Find the TutorialApplication::createScene member function. We will only be manipulating the contents of this function in this tutorial. The first thing we want to do is set the ambient light for the scene so that we can see what we are doing. We do this by calling the setAmbientLight function and specifying what color we want. Note that the ColourValue constructor expects values for red, green, and blue in the range between 0 and 1. Add this line to createScene:

mSceneManager.SetAmbientLight(Color.White);

The next thing we need to do is create an Entity. We do this by calling the SceneManager's createEntity member function:

Entity ent1 =  mSceneManager.CreateEntity("robot","robot.mesh");

Ok several questions should pop up. First of all, where did mSceneMgr come from, and what are the parameters we are calling the function with? The mSceneMgr variable contains the current SceneManager object (this is done for us by the ExampleApplication class). The first parameter to createEntity is the name of the Entity we are creating. All entities must have a unique name. You will get an error if you try to create two entities with the same name. The "robot.mesh" parameter specifies the mesh we want to use for the Entity. Again, the mesh that we are using has been preloaded for us by the ExampleApplication class.

Now that we have created the Entity, we need to create a SceneNode to attach it to. Since every SceneManager has a root SceneNode, we will be creating a child of that node:

SceneNode node1 = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode");

This long statement first calls the getRootSceneNode of the current SceneManager. Then it calls the createChildSceneNode method of the root SceneNode. The parameter to createChildSceneNode is the name of the SceneNode we are creating. Like the Entity class, no two SceneNodes can have the same name.

Finally, we need to attach the Entity to the SceneNode so that the Robot has a location to be rendered at:

node1.AttachObject(ent1);

And that's it! Compile and run your application. You should see a robot standing on the screen.

NOTE: Robot.mesh is not in OgreCore.zip. Following the tutorials to this point your app may
run but come up empty. I found adding the following to the resources.cfg and adding the
appropriate directories got the application to work.

FileSystem=../../media/materials/programs
 FileSystem=../../media/materials/scripts
 FileSystem=../../media/materials/textures
 FileSystem=../../media/materials/models
 FileSystem=../../media/models

Coordinates and Vectors



Before we go any further, we need to talk about screen coordinates and Ogre Vector objects. Ogre (like many graphics engines) uses the x and z axis as the horizontal plane, and the y axis as your vertical axis. As you are looking at your monitor now, the x axis would run from the left side to the right side of your monitor, with the right side being the positive x direction. The y axis would run from the bottom of your monitor to the top of your monitor, with the top being the positive y direction. The z axis would run into and out of your screen, with out of the screen being the positive z direction.

Notice how our Robot is facing along the positive x direction? This is a property of the mesh itself, and how it was designed. Ogre makes no assumptions about how you orient your models. Each mesh that you load may have a different "starting direction" which it is facing.

Ogre uses the Vector class to represent both position and direction (there is no Point class). There are vectors defined for 2 (Vector2), 3 (Vector3), and 4 (Vector4) dimensions, with Vector3 being the most commonly used. If you are not familiar with Vectors, I suggest you brush up on it before doing anything serious with Ogre. The math behind Vectors will become very useful when you start working on complex programs.

Adding another Object

Now that you understand how the coordinate systems work, we can go back to our code. In the three lines that we have written, nowhere did we specify the exact location that we want our Robot to appear at. A large majority of the functions in Ogre have default parameters for them. For example, the SceneNode::createChildSceneNode member function in Ogre has three parameters: the name of the SceneNode, the position of the SceneNode, and the initial rotation (orientation) the SceneNode is facing. The position, as you can see, has been set for us to the coordinates (0, 0, 0). Lets create another SceneNode, but this time we'll specify the starting location to be something other than the origin:

Entity ent2 = mSceneManager.CreateEntity("Robot2", "robot.mesh");
         SceneNode node2 = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode2", new Vector3(50, 0, 0));
         node2.AttachObject(ent2);

This should look familiar. We have done the exact same thing as before, with two exceptions. First of all, we have named the Entity and SceneNode to something slightly different. The second thing we have done is specified that the starting position will be 50 units in the x direction away from the root SceneNode (remember that all SceneNode positions are relative to their parents). Compile and run the demo. Now there are two robots side-by-side.

Entities more in Depth

The Entity class is very extensive, and I will not be covering how to use every portion of the object here...just enough to get you started. There are a few immediately useful member functions in Entity that I'd like to point out.

The first is Entity::setVisible and Entity::isVisible. You can set any Entity to be visible or not by simply calling this function. If you need to hide an Entity, but later display it, then call this function instead of destroying the Entity and later recreating it. Note that you don't need to "pool" Entities up. Only one copy of any object's mesh and texture are ever loaded into memory, so you are not saving yourself much by trying to save them. The only thing you really save is the creation and destruction costs for the Entity object itself, which is relatively low.

The getName function returns the name of Entity, and the getParentSceneNode function returns the SceneNode that the Entity is attached to.

SceneNodes more in Depth

The SceneNode class is very complex. There are a lot of things that can be done with a SceneNode, so we'll only cover some of the most useful.

You can get and set the position of a SceneNode with getPosition and setPosition (always relative to the parent SceneNode). You can move the object relative to its current position by using the translate method.

SceneNodes not only set position, but they also manage scale and rotation of the object as well. You can set the scale of an object with scale function. You can use the yaw, roll, and pitch functions to rotate objects. You can use resetOrientation to reset all rotations done to the object. You can also use the setOrientation, getOrientation, and rotate functions for more advanced rotations. We will not be covering Quaternions until a much later tutorial though.

You have already seen the attachObject function. These related functions are also useful if you are looking to manipulate the objects that are attached to a SceneNode: numAttachedObjects, getAttachedObject (there are multiple versions of this function), detachObject (also multiple versions), detachAllObjects. There are also a whole set of functions for dealing with parent and child SceneNodes as well.

Since all positions/translating is done relative to the parent SceneNode, we can make two SceneNodes move together very easily. We currently have this code in application:

Entity ent1 = mSceneManager.CreateEntity("Robot","robot.mesh");
         SceneNode node1 = SceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode");
         node1.AttachObject(ent1);
         Entity ent2 = mSceneManager.CreateEntity("Robot2", "robot.mesh");
         SceneNode node2 = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode2", new Vector3(50,0,0));
         node2.AttachObject(ent2);

If we change the 6th line from this:

SceneNode node2 = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode2", new Vector3(50,0,0));

To this:

SceneNode node2 = node1.CreateChildSceneNode("RobotNode2", new Vector3(50, 0, 0));

Then we have made RobotNode2 a child of RobotNode. Moving node1 will move node2 along with it, but moving node2 will not affect node1. For example this code would move only RobotNode2:

node2.Translate(50, 0, 0);

The following code would move RobotNode, and since RobotNode2 is a child of RobotNode, RobotNode2 would be moved as well:

node1.Translate(25, 0, 0);

If you are having trouble with this, the easiest thing to do is to start at the root SceneNode and go downwards. Lets say (as in this case), we started node1 and (0, 0, 0) and translated it by (25, 0, 0), thus node1's position is (25, 0, 0) relative to its parent. node2 started at (50, 0, 0) and we translated it by (10, 0, 10), so its new position is (60, 0, 10) relative to it's parent.

Now lets figure out where these things really are. Start at the root SceneNode. It's position is always (0, 0, 0). Now, node1's position is (root + node1): (0, 0, 0) + (25, 0, 0) = (25, 0, 0). Not surprising. Now, node2 is a child of node1, so its position is (root + node1 + node2): (0, 0, 0) + (25, 0, 0) + (60, 0, 10) = (85, 0, 10). This is just an example to explain how to think about SceneNode position inheritance. You will rarely ever need to calculate the absolute position of your nodes.

Lastly, note that you can get both SceneNodes and Entities by their name by calling getSceneNode and getEntity methods of the SceneManager, so you don't have to keep a pointer to every SceneNode you create. You should hang on to the ones you use often though.

Things to Try

By now you should have a basic grasp of Entities, SceneNodes, and the SceneManager. I suggest starting with the code above and adding and removing Robots from the scene. Once you have done that, clear all the contents out of the createScene method, and play with each of the following code segments:

Scale

You can scale the mesh by calling the scale method in SceneNode. Try changing the values in scale and see what you get:

Entity ent = mSceneManager.CreateEntity("Robot", "robot.mesh");
         SceneNode node = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode");
         node.AttachObject(ent);
         node.Scale( .5f, 1f, 2f );
         ent = mSceneManager.CreateEntity("Robot2", "robot.mesh");
         node = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode2", new Vector3(50, 0, 0));
         node.AttachObject(ent);
         node.Scale( 1.0f,2.0f,1.0f);

Rotations



You can rotate the object by using the yaw, pitch, and roll methods using either Degree or Radian objects. Try changing the Degree amount and combining multiple transforms:

Entity ent = mSceneManager.CreateEntity("Robot", "robot.mesh");
         SceneNode node = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode", new Vector3(-100, 0, 0));
         node.AttachObject(ent);
 
         node.Yaw(-90);
 
         ent = mSceneManager.CreateEntity("Robot2", "robot.mesh");
         node = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode2");
         node.AttachObject(ent);
 
         node.Pitch(-90);
 
         ent = mSceneManager.CreateEntity("Robot3", "robot.mesh");
         node = mSceneManager.GetRootSceneNode().CreateChildSceneNode("RobotNode3", new Vector3(100, 0, 0));
         node.AttachObject(ent);
 
         node.Roll(-90);

VB.NET Code Translation


Imports System
 Imports System.Drawing
 Imports OgreDotNet
 Imports Math3D
 Namespace TutorialApplication1
     Public Class TutorialApplication
         Inherits ExampleApplication
         Protected Overrides Sub CreateScene()
             mSceneManager.SetAmbientLight(Color.White)
             Dim ent1 As Entity = mSceneManager.CreateEntity("robot", "robot.mesh")
             Dim node1 As SceneNode = mSceneManager.GetRootSceneNode.CreateChildSceneNode("RobotNode") 
             node1.AttachObject(ent1)
             Dim ent2 As Entity = mSceneManager.CreateEntity("robot2", "robot.mesh")
             Dim node2 As SceneNode = mSceneManager.GetRootSceneNode.CreateChildSceneNode("RobotNode2", New Vector3(50, 0,0))
             node2.AttachObject(ent2)
         End Sub
     End Class
     Module main
         Public Sub Main()
             Dim app As New TutorialApplication1.TutorialApplication
             app.Start()
         End Sub
     End Module
 End Namespace

Conclusions



By this point you should have a very basic grasp of the SceneManager, SceneNode, and Entity classes. You do not have to be familiar with all of the functions that I have given reference to. Since these are the most basic objects, we will be using them very often. You will get more familiar with them after working through the next few tutorials.

What do you think?

This tutorial was designed to help out anyone who is completely new to Ogre get started. If you find something that is not clear, needs more explanation, or if you want to leave a comment about the tutorial, please post in this thread on the Ogre forums.

Thanks!
Clay

<HR>
Creative Commons Copyright -- Some rights reserved.


THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CREATIVE COMMONS PUBLIC LICENSE ("CCPL" OR "LICENSE"). THE WORK IS PROTECTED BY COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS PROHIBITED.

BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HERE, YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE LICENSOR GRANTS YOU THE RIGHTS CONTAINED HERE IN CONSIDERATION OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS.

1. Definitions

  • "Collective Work" means a work, such as a periodical issue, anthology or encyclopedia, in which the Work in its entirety in unmodified form, along with a number of other contributions, constituting separate and independent works in themselves, are assembled into a collective whole. A work that constitutes a Collective Work will not be considered a Derivative Work (as defined below) for the purposes of this License.
  • "Derivative Work" means a work based upon the Work or upon the Work and other pre-existing works, such as a translation, musical arrangement, dramatization, fictionalization, motion picture version, sound recording, art reproduction, abridgment, condensation, or any other form in which the Work may be recast, transformed, or adapted, except that a work that constitutes a Collective Work will not be considered a Derivative Work for the purpose of this License. For the avoidance of doubt, where the Work is a musical composition or sound recording, the synchronization of the Work in timed-relation with a moving image ("synching") will be considered a Derivative Work for the purpose of this License.
  • "Licensor" means the individual or entity that offers the Work under the terms of this License.
  • "Original Author" means the individual or entity who created the Work.
  • "Work" means the copyrightable work of authorship offered under the terms of this License.
  • "You" means an individual or entity exercising rights under this License who has not previously violated the terms of this License with respect to the Work, or who has received express permission from the Licensor to exercise rights under this License despite a previous violation.
  • "License Elements" means the following high-level license attributes as selected by Licensor and indicated in the title of this License: Attribution, ShareAlike.

2. Fair Use Rights

Nothing in this license is intended to reduce, limit, or restrict any rights arising from fair use, first sale or other limitations on the exclusive rights of the copyright owner under copyright law or other applicable laws.

3. License Grant

Subject to the terms and conditions of this License, Licensor hereby grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the applicable copyright) license to exercise the rights in the Work as stated below:

  • to reproduce the Work, to incorporate the Work into one or more Collective Works, and to reproduce the Work as incorporated in the Collective Works;
  • to create and reproduce Derivative Works;
  • to distribute copies or phonorecords of, display publicly, perform publicly, and perform publicly by means of a digital audio transmission the Work including as incorporated in Collective Works;
  • to distribute copies or phonorecords of, display publicly, perform publicly, and perform publicly by means of a digital audio transmission Derivative Works.
  • For the avoidance of doubt, where the work is a musical composition:
    • Performance Royalties Under Blanket Licenses. Licensor waives the exclusive right to collect, whether individually or via a performance rights society (e.g. ASCAP, BMI, SESAC), royalties for the public performance or public digital performance (e.g. webcast) of the Work.
    • Mechanical Rights and Statutory Royalties. Licensor waives the exclusive right to collect, whether individually or via a music rights society or designated agent (e.g. Harry Fox Agency), royalties for any phonorecord You create from the Work ("cover version") and distribute, subject to the compulsory license created by 17 USC Section 115 of the US Copyright Act (or the equivalent in other jurisdictions).
    • Webcasting Rights and Statutory Royalties. For the avoidance of doubt, where the Work is a sound recording, Licensor waives the exclusive right to collect, whether individually or via a performance-rights society (e.g. SoundExchange), royalties for the public digital performance (e.g. webcast) of the Work, subject to the compulsory license created by 17 USC Section 114 of the US Copyright Act (or the equivalent in other jurisdictions).


The above rights may be exercised in all media and formats whether now known or hereafter devised. The above rights include the right to make such modifications as are technically necessary to exercise the rights in other media and formats. All rights not expressly granted by Licensor are hereby reserved.

4. Restrictions

The license granted in Section 3 above is expressly made subject to and limited by the following restrictions:

  • You may distribute, publicly display, publicly perform, or publicly digitally perform the Work only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy or phonorecord of the Work You distribute, publicly display, publicly perform, or publicly digitally perform. You may not offer or impose any terms on the Work that alter or restrict the terms of this License or the recipients' exercise of the rights granted hereunder. You may not sublicense the Work. You must keep intact all notices that refer to this License and to the disclaimer of warranties. You may not distribute, publicly display, publicly perform, or publicly digitally perform the Work with any technological measures that control access or use of the Work in a manner inconsistent with the terms of this License Agreement. The above applies to the Work as incorporated in a Collective Work, but this does not require the Collective Work apart from the Work itself to be made subject to the terms of this License. If You create a Collective Work, upon notice from any Licensor You must, to the extent practicable, remove from the Collective Work any credit as required by clause 4(c), as requested. If You create a Derivative Work, upon notice from any Licensor You must, to the extent practicable, remove from the Derivative Work any credit as required by clause 4(c), as requested.
  • You may distribute, publicly display, publicly perform, or publicly digitally perform a Derivative Work only under the terms of this License, a later version of this License with the same License Elements as this License, or a Creative Commons iCommons license that contains the same License Elements as this License (e.g. Attribution-ShareAlike 2.5 Japan). You must include a copy of, or the Uniform Resource Identifier for, this License or other license specified in the previous sentence with every copy or phonorecord of each Derivative Work You distribute, publicly display, publicly perform, or publicly digitally perform. You may not offer or impose any terms on the Derivative Works that alter or restrict the terms of this License or the recipients' exercise of the rights granted hereunder, and You must keep intact all notices that refer to this License and to the disclaimer of warranties. You may not distribute, publicly display, publicly perform, or publicly digitally perform the Derivative Work with any technological measures that control access or use of the Work in a manner inconsistent with the terms of this License Agreement. The above applies to the Derivative Work as incorporated in a Collective Work, but this does not require the Collective Work apart from the Derivative Work itself to be made subject to the terms of this License.
  • If you distribute, publicly display, publicly perform, or publicly digitally perform the Work or any Derivative Works or Collective Works, You must keep intact all copyright notices for the Work and provide, reasonable to the medium or means You are utilizing: (i) the name of the Original Author (or pseudonym, if applicable) if supplied, and/or (ii) if the Original Author and/or Licensor designate another party or parties (e.g. a sponsor institute, publishing entity, journal) for attribution in Licensor's copyright notice, terms of service or by other reasonable means, the name of such party or parties; the title of the Work if supplied; to the extent reasonably practicable, the Uniform Resource Identifier, if any, that Licensor specifies to be associated with the Work, unless such URI does not refer to the copyright notice or licensing information for the Work; and in the case of a Derivative Work, a credit identifying the use of the Work in the Derivative Work (e.g., "French translation of the Work by Original Author," or "Screenplay based on original Work by Original Author"). Such credit may be implemented in any reasonable manner; provided, however, that in the case of a Derivative Work or Collective Work, at a minimum such credit will appear where any other comparable authorship credit appears and in a manner at least as prominent as such other comparable authorship credit.

5. Representations, Warranties and Disclaimer

UNLESS OTHERWISE AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE MATERIALS, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU.

6. Limitation on Liability.

EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7. Termination

  • This License and the rights granted hereunder will terminate automatically upon any breach by You of the terms of this License. Individuals or entities who have received Derivative Works or Collective Works from You under this License, however, will not have their licenses terminated provided such individuals or entities remain in full compliance with those licenses. Sections 1, 2, 5, 6, 7, and 8 will survive any termination of this License.
  • Subject to the above terms and conditions, the license granted here is perpetual (for the duration of the applicable copyright in the Work). Notwithstanding the above, Licensor reserves the right to release the Work under different license terms or to stop distributing the Work at any time; provided, however that any such election will not serve to withdraw this License (or any other license that has been, or is required to be, granted under the terms of this License), and this License will continue in full force and effect unless terminated as stated above.

8. Miscellaneous

  • Each time You distribute or publicly digitally perform the Work or a Collective Work, the Licensor offers to the recipient a license to the Work on the same terms and conditions as the license granted to You under this License.
  • Each time You distribute or publicly digitally perform a Derivative Work, Licensor offers to the recipient a license to the original Work on the same terms and conditions as the license granted to You under this License.
  • If any provision of this License is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this License, and without further action by the parties to this agreement, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.
  • No term or provision of this License shall be deemed waived and no breach consented to unless such waiver or consent shall be in writing and signed by the party to be charged with such waiver or consent.
  • This License constitutes the entire agreement between the parties with respect to the Work licensed here. There are no understandings, agreements or representations with respect to the Work not specified here. Licensor shall not be bound by any additional provisions that may appear in any communication from You. This License may not be modified without the mutual written agreement of the Licensor and You.